Small steps are key to improving efficiency, like eliminating distractions and embracing new technology. It also involves encouraging a workplace culture that seeks to improve and align business operations with customer needs.
For instance, if you own a 2-stroke mower, using a fuel stabilizer in your gasoline can make it last longer and prevent engine issues like hard starting. After every usage, clean the mower’s underside as well.
Spark Plugs
Whether using an old or new lawnmower, spark plugs are crucial in igniting the fuel-air mixture for combustion. If your spark plugs are dirty or worn, they must produce a stronger spark to keep your engine running efficiently. Therefore, you might require replacement parts for your Craftsman lawnmower.
Changing your spark plugs regularly is a relatively inexpensive yet very important step in small engine maintenance. It’s also a task that anyone can perform in a few minutes with a handful of tools.
Locate the appropriate spark plug for your lawnmower and, if necessary, carefully adjust the gap settings. Using a wire brush or specialist spark plug cleaner, gently remove any remaining oil from the old spark plug and clean it. Once the spark plug wire is reconnected, your mower is prepared for the subsequent yard.
Air Filter
The engine of a gas mower needs clean air to work properly. If dust or debris gets into the engine, it can damage or shorten the life of your mower. This is why it’s important to clean your filter regularly.
Most lawnmowers use foam filters, which are reusable and washable. They’re also easy to find and inexpensive. Using water on your air filter is safe and effective, but be careful not to get any moisture inside the filter, as this can cause a leak.
It should be thoroughly dry before you put your foam filter back into the housing. A good way to do this is to put a bit of oil on the filter, then massage it into place so the oil spreads evenly over the surface.
Battery
When a mower isn’t used through the winter, it should be stored properly. Like a vehicle battery, one that isn’t regularly charged will lose its power over time, and cold temperatures can accelerate this process significantly.
Disconnect the battery and clean the terminals using a wire brush or battery cleaning tool to prevent this. Then, choose a battery charger that matches the voltage and chemistry of the battery (lead-acid batteries drain themselves when not in use; lithium-ion batteries don’t). It would help if you also considered storing the battery in a temperature-controlled area, as extreme cold can harm a battery case. Also, blow out the battery compartments and vents to eliminate any dust or debris buildup. This helps maintain proper electrical flow and increases the battery’s lifespan.
Undercarriage
Grass caked under the mower can clog the discharge chute, and it’s important to clear out this debris frequently for optimal airflow and cutting efficiency. A putty knife can help remove grass and dirt, or a hose can spray it off.
Pivot points, wheel axles, and other moving parts on the mower require lubrication to lower friction and maintain performance. Consult the manual to determine what kind of lubricant is required for each component, then apply it according to the instructions.
Before storing the mower for an extended period, drain the gasoline tank and add a fuel stabilizer to prevent moisture, corrosion, and carburetor clogging. Ensure the spark plug, blade, and air filter are removed, and all combustible materials are completely out of the muffler area.
Read also Georgia Car Shipping, Thing To Know
Blades
Sharp blades ensure a clean cut, reducing the mower’s stress and promoting lawn health. Additionally, a sharp blade will save on fuel costs.
It is essential to use safety precautions when working with blades and to wear heavy gloves. First, remove the mower blade and scrape the underside free of dirt, grass, rust, or debris. This will make it easier to sharpen.
A blade can be sharpened using a metal file or whetstone and should be carefully cleaned afterward to avoid damaging the metal. Once the blade is clean, it must be precisely balanced before reinstalling it to prevent vibrations and uneven cutting. This can be done with a balancer or simply by placing the blade on a cone and observing how it settles.
